User manual

7
EN
WHICH SOFTWARE AND HARDWARE DO YOU REQUIRE
TO CONTROL AND REMOTE EL-FLASH UNITS FROM THE
IPHONE
™
…
1. Download and install the EL-Skyport RX WiFi Mobile App from the Apple
®
StoreforiPhone™,iPad™,iPodTouch™(free
of charge). Alternatively follow the link:
http://bc.gs/12
2. The EL-Skyport RX WiFi module is required.
3. AnyElinchromRXashunit,suchasDigitalRX1200/2400powerpacks,StyleRX300/600/1200compacts,Ranger
RX / RX SPEED / RX SPEED AS battery power packs with the optional plug-in EL-Skyport RX Tranceiver or the Ranger
RX Quadra AS battery power pack with built-in EL-Skyport RX receiver.
4. More units will be released with the time to offer this remote option, please visit frequently www.elinchrom.com to find
actual information.
SETTING A PASSWORD ON THE EL-SKYPORT WIFI
The EL-Skyport WiFi network can be protected using a password in order to prevent unauthorized devices to make changes on
thesettingsofyourashunits.ThepasswordwillbestoredintheEL-Skyportapplicationafterthesetup,andwon’tbeaskedever
again unless you try to access the module using another device or if you reinstall the application.
Settingapassword:GototheEL-MobileAppsettings,typeyourpasswordintothe“Password”eldandconrmwiththe“Done”
button. The EL-Skyport RX WiFi module will need to store the password and reconfigure itself, and won’t be available for a few
seconds.
Removingthepassword:IntheEL-MobileApp“Settings”,emptythe“Password”eldandconrmwiththe“Done”button.
LI-ION BATTERY
Li-Ionbatterywith900mAh,onechargelastsupto10hours.
Rechargingtimeisapprox.3hourswiththeEL-SkyportUniversalcharger.
UseonlyElinchromEL-SkyportUniversalcharger!
NOTE:
Charge the battery before using!
Recharge the battery at least once every 3 months!