User manual

6
WIFI SETUP FOR IPHONE
™
,
IPAD
™
AND IPOD TOUCH
™
FindtheWiFiSetupguidealsointheEL-SkyportiPhone™App
under Information!
1. Switch ON the EL-Skyport RX WiFi module and wait
approx. 5 seconds until the module is completely
configured.
2. Open the Settings of the operating software on your
iPhone™,iPad™oriPodtouch™.
3. Select WiFi and wait until the EL-Skyport WiFi
network is listed.
4. Select the EL-Skyport WiFi network, named EL-SP-
WiFi-xxxx, (xxxx indicates the serial number of your
EL-Skyport WiFi module).
5. Open the network settings by selecting the blue arrow
on the right of the name of the network.
6. IP Address: Select Static.
7. Set IP Address to 169.254.1.5 (169.254.1.3 up to
169.254.1.254 are available).
8. SetSubnetMaskto255.255.0.0.
9. Leave all other fields blank.
10. Iftheiosversionofyourdeviceisolderthan4.3,you
mayselectAuto-Joininordertojoinautomaticallythe
EL-Skyport Wi-Fi network when found by your device.
11. Exit the settings and go to the EL-Skyport Mobile
Remote Application.
12. Youmayhavetogobacktothesettingsandselect
your usual WiFi network after use, if the change was
not automatically applied after turning off the EL-
Skyport WiFi module.
5
6
10
7
8