User manual

On/Off & Mode Button: Press once to switch the module ON or OFF. After switching ON, the module needs

approx. 5 Seconds to set up the WiFi connection. See module conﬁguration for the

different module modes.

EL-Skyport Antenna: Turn-around antenna to get best possible distance range performance.

SYNC Socket: TheEL-SkyportWiFimodulecanbeusedasaEL-SkyportUniversalReceivermodule.

All conﬁgurations can be applied by using the Mobile App.

Max.SYNCVoltage=50VDC

Charge Socket: DC5V/500mAbatterychargeinputsocketfortheElinchromEL-Skyportmulti-voltage

charger only.

RESET Button: UseonlyiftheEL-SkyportRXWiFimoduledoesnotswitchONorOFFanymore.Thiswill

also RESET the WiFi password to default value!

LED

Status LED: ShowstheactualstatusoftheModule(sameasUniversalModule)

• ONwhenthebatterycharges.

• Flashesonceevery3-4secondsinNORMALSYNCmode.

• Flashestwiceevery3-4secondsinSPEEDSYNCmode.

• FlashesfastafterpressingtheONbutton5stochangefromNORMALtoSPEED

SYNCmode.

• FlashesfastmultipletimesafterpressingtheONbutton10stoswitchbackto

DEFAULTsettings.

• FlashesfastmultipletimesafterpressingtheONbutton15stoenablethe

FIRMWAREUPDATEmode.

WiFi LED:

• BlinkswhenWiFimoduleiscongured,butNOTconnected.

• ONwhenWiFiisconnectedtoyourApple

device and is ready for Data transfer.

Data LED: Shows that the WiFi data transfer between your Apple

device and the EL-Skyport RX

WiFi module is active.