Transmitter Speed 19350 Instructions for use Betriebsanleitung Mode d’emploi Instrucciones para el uso Istruzioni per l’uso E L S Tr a n s m i t t e r S p e e d M a n u a l 02.02.
English 1 - 10 Deutsch 11 - 20 Français 21 - 30 Español 31 - 40 Italiano 41 - 50 Guarantee 51 - 54
English EL-Skyport Transmitter Speed 19350 Contents : Features 2 Battery Installation 3 Hot-shoe connector 3 Operating Instructions 3 Frequency Channel 4 Trigger Modes 5 Integrated SYNC Socket 6 Elinchrom RX Features 6 EL-Skyport Modules 8 Troubleshooting 9 CE Statements 9 FCC Compliance and Advisory Statement 10 Disposal and recycling 10
EL-Skyport Transmitter SPEED//19350 Operating instructions : 2.4 GHz digital wireless Flash Trigger Transmitter Features EL-Skyport Transmitter Speed is designed with the latest 2.4 GHz Digital Wireless Technology. • SLR Camera Sync speeds: SPEED mode up to 1/250 s, STANDARD mode 1/160 - 1/200 s. • 5 selectable trigger modes, (4 Groups + All) • 8 frequency channels. • 40 Bit security encryption. • Up to 60 m range indoors for standard mode and up to 40 m in speed mode.
Battery Installation 1. Pull the battery drawer out carefully. 2. Place the Lithium battery, see Fig. 1 for correct polarity. 3. Close the battery drawer. ! CAUTION: • Ensure correct polarity / minus pole on top. • Use only the Lithium Battery CR2430 3.0 V 19372. • Remove battery if the EL-Skyport Transmitter is not used for some time. • Never short-circuit battery poles. • Avoid direct sunlight or temperatures above 45°C.
Fig.
EL-Skyport Sync Speed & Standard Mode The SPEED function is available for Ranger Quadra AS, BXRi 250 / 500 und D-Lite it and all other units, when used with the EL-Skyport Universal Speed. Select “Speed” sync mode Synchronises SLR cameras up to 1/250 s, or compact digital cameras up to 1/2850 s, depending on the camera type & the flash duration of the flash unit. - Select “Group” or “All” mode. - Press test push button for minimum 5 seconds until the STATUS LED flashes two times.
The EL-Skyport Transmitter triggers the EL-Skyport Receiver modules in the following modes: 1. Off Unit is OFF, no function. 2. Select Group - Group (1 to 4). Set switch to Group. and select Group 1 to 4. All corresponding EL-Skyport Receivers with the same selected Group (1 to 4) are triggered. 3. ALL Mode switch is set to ALL. All corresponding EL-Skyport Receivers are triggered regardless of which Group is selected. Integrated Hot-Shoe SYNC 2.
Power save mode timer: - After not using the Transmitter for 30 minutes the Power Save mode is active. To reactivate the Transmitter, press the TEST push button. - The Power Save mode timer can be configured with the EL-Skyport PC / MAC software v 3.0 and higher. Status LED: - LED flashes every 4 seconds one time in “Standard” mode and two times in “Speed” mode. - LED intensity correspond to the battery status - if off or very low => exchange the battery.
EL-Skyport Modules EL-Skyport Universal SPEED (NEW) / Universal (previous version) • Universal Receiver for all makes of Flash with a SYNC socket, conforming to Sync norms! EL-Skyport Transceiver RX • This Transceiver is only for Elinchrom RX units. The module operates all RX features with the EL-Skyport software and triggers the flash.
Troubleshooting Should an error occur, first check the following points: Having this problem? Check the following points: No flash unit can be triggered with the Transmitter Mode “All” is selected Some units do not fire when triggered with the Transmitter Mode “Grp” is selected Check if the Channel selector switch is set to the same Group. Reduce distance to any “not working” unit. Check if Transmitter is in the same trigger mode Speed / Standard.
FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject of the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interferences that may cause undesired operation. The equipment has been certified to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules.
