Datasheet

21
EL-Skyport Modules
EL-Skyport Universal SPEED (NEW) / Universal (previous version)
Universal Receiver for all makes of Flash with a SYNC socket, conforming to Sync norms!
EL-Skyport Transceiver RX
This Transceiver is only for Elinchrom RX units. The module operates all RX
featureswiththeEL-Skyportsoftwareandtriggerstheash.
EL-Skyport USB RX SPEED (NEW) / USB RX (previous version)
• TooperateRXashunitsviacomputertheUSBmoduleshouldbeusedin
conjunction with the EL-Skyport Transceiver RX and the EL-Skyport software.
Troubleshooting
Shouldanerroroccur,rstcheckthefollowingpoints:
Having this problem? Check the following points:
Noashunitcanbetriggered
with the Transmitter
Mode “All” is selected
Check if the Transmitter is switched ON.
Check battery polarity.
Check if the Receiver module is connected correctly to the unit.
Check if the frequency selector switch is set to the same channel.
Check if Transmitter is in the same trigger mode Speed or Standard.
Someunitsdonotrewhen
triggered with the Transmitter
Mode “Grp” is selected
Check if the Channel selector switch is set to the same Group.
Reduce distance to any “not working” unit.
Check if Transmitter is in the same trigger mode Speed / Standard.
TESTashworks,butthecamera
willnottriggerashunit
Checkhot-shoetting.
Connect the 2.5 mm to PC SYNC cable instead of hot-shoe connection.
Limited Distance range
Reposition the units.
Increase the distance to walls and ceilings.
Position the antenna of Transmitter and Receiver.
Use an RX extension cable to reduce the distance between the modules.
English
Universal Speed
& Universal
Transceiver RX
19353
USB RX Speed
& USB RX