Mini Par UVW LED User Guide
©2019 Eliminating Lighting all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. Eliminator logo and identifying product names and numbers herein are trademarks of Eliminator Lighting. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
CONTENTS General Information 4 Limited Warranty (USA Only) 5 Safety Guidelines 6 Maintenance Guidelines 8 Overview 9 Installation Guidelines 10 System Menu 11 Operation 11 DMX Traits 13 Trouble Shooting and Frequently Asked Questions 14 Technical Specifications and Dimensions 15 3
GENERAL INFORMATION INTRODUCTION Please read and understand all instructions in this manual carefully and thoroughly before attempting to operate this product. These instructions contain important safety and use information. UNPACKING: This product has been thoroughly tested and has been shipped in perfect condition. Carefully check the shipping carton for damage that may have occurred during shipping.
ELIMINATOR LIGHTING MANUFACTURER'S LIMITED WARRANTY (USA) A. Eliminator Lighting, an ADJ Products, LLC brand, hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
SAFETY GUIDELINES To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. ELIMINATOR LIGHTING is not responsible for injury and/or damages resulting from the misuse of these devices due to the disregard of the information printed in this manual. Only qualified and/or certified personnel should perform installation of these devices and only the original rigging parts included with these devices should be used for installation.
SAFETY GUIDELINES DO NOT position devices close to any FLAMMABLE MATERIALS while operating. DO NOT attempt installation and/or operation of devices without knowledge how to do so. DO NOT permit operation by persons who are not qualified to operate these types of devices. DO NOT shake devices, avoid brute force when installing and/or operating. DO NOT operate these devices if the main power cord has become frayed, crimped and/or damaged. Replace any damaged power cords with a similar power rating.
MAINTENANCE GUIDELINES DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE! CLEANING Frequent cleaning is recommended to insure proper function, optimized light output, and an extended life. The frequency of cleaning depends on the environment in which the device operates in: damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture housing and/or light fixture optics.
OVERVIEW INCLUDED ITEMS (1) Mini Par UVW LED 2 4 5 6 3 1 7 11 10 1. Mini Par UVW LED 5. DMX Out 9. Down Button 2. Yoke 6. DMX In 10. Up Button 3. Star Knob (2) 7. LCD Display 11. Menu Button 4. Power Cable 8.
INSTALLATION INSTRUCTIONS FLAMMABLE MATERIAL WARNING Keep devices minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations.
SYSTEM MENU Menu Addr ASCACCFAde SOUF rL-gL-bL-uL-FLAS Submenu A.001-512 AS.00-12 AC.00-12 FA.00-12 SF.00-12 rL.00-12 gL.00-12 bL.00-12 uL.00-12 FL.
OPERATION Pulse Change Mode: 1. Plug the fixture in and press the MENU or UP and DOWN buttons until “ACC -” is displayed. 2. Press the ENTER button to adjust the Pulse speed. Use the UP and DOWN buttons to adjust the speed. 3. The speed can be adjusted between “AC.00” (slowest) to “AC.12” (fastest). 4. After you have adjusted the pulse speed you can activate strobing by pressing the MENU button until “FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00” (flash off) to “FL.
DMX TRAITS DMX CHANNELS / VALUES / FUNCTIONS Channel Mode (4,6 or 8) / Channel 4 Channels 6 Channels 8 Channels Channel 1 Channel 1 Channel 1 Value Function 0-255 Dimmer 0-255 UV Channel 2 Channel 2 Channel 2 0-255 UV Channel 3 Channel 3 Channel 3 0-255 UV Channel 4 Channel 4 0-255 UV Channel 5 Channel 5 0-255 W Channel 4 0-5 Channel 6 Channel 6 Channel 7 Channel 8 13 No Function 6-255 Flash (Slow to Fast) 0-15 No Function 16-75 ASC- 76-135 ACC- 136-195 FAde 19
TROUBLE SHOOTING TIPS The light does not turn ON 1. Confirm the AC power cord from the light is not damaged or cut. 2. Check if circuit breaker that controls the AC outlet that the light is plugged into is not tripped. 3. Confirm the power connection is not loose. 4. If none of these solutions work, please contact Eliminator Lighting Customer Service. The unit is not responding to DMX. 1. Check that the DMX cables are connected properly and are wired correctly. 2.
TECHNICAL SPECIFICATIONS Model: Mini Par UVW LED Voltage: 100V ~ 240V 50/60Hz LEDs: 12 x 1W LEDs UV Range: 398-435nm Beam Angle: 25 Degrees Power Consumption: 14W Working Position: Any Safe Position Duty Cycle: None DMX Channels: 3 DMX Channel Modes (4, 6 and 8 Channel Mode) Colors: White + UV Dimensions (LxWxH): 6.02” x 5.71” x 3.74” (153mm x 145mm x 95mm) Weight: 1lbs / 0.5kgs Specifications subject to change without any prior written notice. DIMENSIONS 5.71” 145 mm 3.74” 95 mm 6.02” 153 mm 6.
