User Guide

Fade Mode:

1. Plug the fixture in and press the MENU button until “FAde” is displayed.

2. Press the ENTER button to adjust the Fade speed. Use the UP and DOWN buttons to adjust the

speed. The speed can be adjusted between “FA.00” (slowest) to “FA.12” (fastest).

3. After you have adjusted the program speed you can activate strobing by pressing the MENU

button until “FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00”

(flash off) to “FL.12” (fastest flash).

Sound Active Pulse Mode:

1. Plug the fixture in and press the MENU button until “SOUF” is displayed.

2. Press the ENTER button to adjust the sound sensitivity. Use the UP and DOWN buttons to adjust

the sensitivity. The sensitivity can be adjusted between “SF.00” (least sensitive) to “SF.12”

(most sensitive).

3. After you have adjusted the sensitivity you can activate strobing by pressing the MENU button

until “FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00”

(flash off) to “FL.12” (fastest flash).

RGBW Dimmer Mode:

1. Plug the fixture in and press the MENU or UP and DOWN buttons until either “rL” (Red),

“gL” (Green), “bL” (Blue), or “uL” (White) is displayed. When your find your desired color you

would like to adjust press ENTER.

2. Use the UP and DOWN buttons to adjust the output intensity. When you are finished adjjusting

press ENTER.

3. After you have adjusted the colors you can activate strobing by pressing the MENU button until

“FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00” (flash off)

to “FL.12” (fastest flash).