Installation Guide
Model 6649 - LED Shop Light
Installation steps
Accessories
Notes:
1. The lamp should be installed in a minimum distance
of 18 inches from any combustible material, to
prevent the occurrence of fire hazard
2. Key parts of the heating will cause burns
3. Use a clean cloth or gloves when installing.
Technical specification
---LED diver: 1 00-240 V ~ 60Hz, 40W , 0.4-0.3A
Light source: LED (0.156w*256pcs leds)
Power: 40w
Maintenance:
Disconnect the power supply, clean the fixture and
accessories.
Inspect the drive inside and keep it dry
Regular connection
3
2
4
A
Ceiling Mount Installation
Connecting the lights
Cable Mount Installation
sthgil eht gnitcennoC
noitallatsnI tnuoM gnilieC
www.HomeSelects.com
1
Shut off power to the outlet box.
C
ARE INSIRUCTIONS
D
usng一 Use a clean, dry cloth.
C
leaning一 To protect the finish,
a
void any harsh abrasives or chemicals.
LED DE 40 W (0.156W x 256)
Circuit diagram
TRIAC
DTMMER
L
N