Installation Guide

T-8 Vapor Tight Light
#6219 Fluorescent T-8 Light
www.
Home
Selects
.com
INSTALLATION INSTRUCTIONS:
Assembly and safety instructions
CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY QUESTIONS PRIOR TO INSTALLATION
Install the T-8 uorescent tubes
Pinch the mounting clips to remove and replace the light frame
Thank you for purchasing this Vapor Tight Light. For more information please e-mail us at [e-mail]
DANGER: Before installation, turn off the main power at the circuit breaker. WARNING: Installation must be performed by a qualified licensed electrician.
CAUTION: To prevent electric shock, do not insert any objects through openings.
3
Assembly of light fixture Assemble the light fixture using the clips. Make sure the acrylic diffuser is seated correctly for a tight fit. Install the T-8 fluorescent tubes carefully (tubes not included).
4
Mounting the fixture Mount the metal clips to the surface where light is to be placed. The mounting clips should be spaced 31” apart Snap the fixture into the clips making sure it is secure Never drill through fixture to mount. This will compromise the water tight feature and could cause damage to the fixture.
1
Assembly of the light fixture Remove the metal fixture pan from the base housing by pinching together the retainer clips. Install the retainer clips by snapping them into the base housing.
Accessories included
(Mounting hole locations)
50”
3.5”
31”
2
Connecting the wires Connect the black supply wire to the black fixture wire. Connect the white supply wire to the white fixture wire. Connect the ground supply wire to the ground fixture wire.
BLACK Supply Wire
BLACK Fixture Wire
WHITE Fixture Wire
WHITE Supply Wire
GROUND Supply Wire
GROUND Fixture Wire
Wiring diagram
Install the cover making sure the gasket is in place
Install the diuser retainer clips
Install the metal plate mounting clips