Technical data

Electronic Scales –models ETS хх L1, L2, B1, B2, S1, S2

4.2. Meteorological Specifications

Type

ETS xx-x

Manufacturer

“Elicom electronic” Ltd , Bulgaria

Classified Accuracy III

Maximal Load 3 kg ≤ Max ≤ 30 kg

Minimal Load 0,020 kg ≤ Min ≤ 0,200 kg

Value of the Real and Check Division 0,001 kg ≤ e ≤ 0,010 kg

Number of Check Divisions n ≤ 3000 for every partial measuring interval

Range of TARE

-Max1 – for dual range

-Мах - for single range

Power Supply АС/DС adapter 220V AC/24V DC/ 3A

Number of Measuring Intervals 1 or 2

Operating Temperature -10 ºС to 40 ºС

5. Operating Instruction

1. Open the box and take out its contents:

- Electronic Scale

- Display Window

- Display Colum

- AC adapter

- User’s Manual

2. Pass the Display Window cable through the metal Display Colum (tube).

3. Connect the Display window cable with the cable of the scale.

4. Insert the Display Colum (tube) into the display bracket in the back of the scale. Screw the Display column

with the 2 assembly screws.

5. Fasten the Display Window to the Display Colum with the 2 assembly screws.

6. Place the scale onto horizontal surface (table). Level the scale by using the 4 adjustable legs at the bottom

of the scale. Turn the legs clockwise or counterclockwise so the bubble of the leveling gauge is inside the

indicated circle which is located under the metal platter in the left side of the scale.

7. Plug the scale AC adapter into a power outlet.

8. Turn On the scale using the ON/OFF switch located on the bottom left side of the scale. After the scale is

turned on, an automatic self-check is started. Wait 10 minutes before you start using the scale. Turning the

scale off is done by the same ON/OFF switch.

9. DO NOT place the scale on the following locations:

- Locations with quick changing temperature

- Locations on direct sun light

- Dusty places and location with high humidity

- Locations with direct path of oscillating fans, ventilation systems or vibrations

10. DO NOT leave loads on the platter for long periods of time

11. DO NOT place the scale near high magnetic fields or utilities generating electromagnetic filed

12. Keep the scale from spilling liquids because they can damage the electronics inside the scale

13. Avoid strong hits or shakes of the scale