Spec Sheet
Doc.No.NPD-EPSAC-SS-AC-(EN30)-2012-02-0774
SPECIFICATION SHEET
Product
Doc. Category :
Electric Powered Lubricated Screw Air Compressor
Marketing
Type :EN30 208-230/460V/60HZ
Revision : R08
Date(Org):30/11/2012
Date(Rev):05/06/2018
S.No Description Units Data
A Model -
EN30-100 EN30-125 EN30-150 EN30-175
B TPL Number -
S012512 S012513 S012514 S012515
1 Free air delivery - FAD
cfm
m3/min
155
4.39
138
3.91
126
3.57
117
3.31
2 Working pressure psi.g
100.0 125.0 150.0 175.0
3 Unloading pressure psi.g
103.0 128.0 153.0 178.0
4 Cut in pressure psi.g
74.0 99.0 124.0 149.0
5 Airend shaft power
hp
kW
40.21
30.00
6 Package input power @ full load hp (kW)
44.22(32.99)
7 Package input power @ zero flow hp (kW)
15.48(11.55) 11.05(8.24)
8 Specific power consumption @ full load kW/100cfm
21.28 23.90 26.18 28.19
9 Capacity control system -
LOAD / UNLOAD
10 Nominal power supply conditions
208 -230/460 V(+/-10%), 60Hz (+/-5%), 3 Phase
11 Main motor rating hp (kW)
40(29.84)Normal rating with SF 1.15 Continuous duty
12 Type of motors (main drive & cooling fan
drive)
-
3Ph squirrel cage induction motor and 3Ph fan motor
13 Insulation and protection of main motor
-
Class F / IP 55
14 Rated speed of main motor rpm
3555
15 Frame size / Mounting type
-
324TS/B3
16 Efficiency of main motor/Efficiency class
-
92.40%/NEMA-PREMIUM
17 Type of starter for main motor
-
Star Delta
18 Fan motor rating per fan x No. of fans hp (kW)
0.35(0.26) X 2fans
19 Rated speed of fan motor rpm
1490
20 Max allowable package current with fan at
nominal power supply
Amps
102.4 - 93.0 / 46.6
21 Flow rate of cooling air @ static pressure (Pa) cfm
4120 @ 0 Pa
22 Oil recommended -
ELGI AIRLUBE UT Synthetic
23 Capacity of seperator tank (full volume) gal
7.656
24 Tank oil fill capacity gal
2.904
25 Oil carry over ppm
3
26 Reference conditions - ambient & altitude °F/ ft
113 and 3280
27 Discharge oil temperature °F
Minimum: Above PDP at given pr. & 90% RH
Maximum: Ambient +113.4
28 Maximum allowable air temperature at outlet °F
Less than Ambient+27
29 Noise level of the compressor dB (A)
69+3
30 Air outlet port size inch
1 1/4" NPT Thread
31 Overall dimensions of the unit, L x B x H inch
36.76 x 45.45 x 63.24
32 Overall dimensions with packing, L x B x H inch
42.5 x 47.2 x 69.9
33 Package nett. weight (Dry condition) lbs
1534
34 Package gross weight with packing lbs
1609
35 Reference standard for FAD and SPC -
ISO 1217- Annexure 'C '
36 Reference standard for noise level -
ISO 2151, Second Edition
37 Reference standard for air purity -
ISO 8573-1
Note:-
Prepared By ARAVINTH N Approved By SUBRAMANIAN K
All data and information in this sheet are confidential and property of ELGI EQUIPMENTS LIMITED
This is system generated document and hence signature is not required
Page 1 of 1

