Spec Sheet
Doc.No.NPD-EPSAC-SS-AC-(EN5)-2015-02-1462
SPECIFICATION SHEET
Product
Doc. Category :
Electric Powered Lubricated Screw Air Compressor
Marketing
Type :EN5 208-230V/60HZ
Revision : R12
Date(Org):20/03/2015
Date(Rev):17/07/2018
S.No Description Units Data
A Model -
EN5-100 EN5-125 EN5-150 EN5-175
B TPL Number -
S013462 S013463 S013464 S013465
1 Free air delivery - FAD
cfm
m3/min
29.9
0.85
26.5
0.75
24.2
0.69
21.0
0.59
2 Working pressure psi.g
100.0 125.0 150.0 175.0
3 Unloading pressure psi.g
103.0 128.0 153.0 178.0
4 Cut in pressure psi.g
79.0 104.0 129.0 154.0
5 Airend shaft power
hp
kW
8.18
6.10
6 Package input power @ full load hp (kW)
9.64(7.19)
7 Package input power @ zero flow hp (kW)
3.85(2.87)
8 Specific power consumption @ full load kW/100cfm
24.04 27.12 29.70 34.23
9 Capacity control system -
LOAD / UNLOAD
10 Nominal power supply conditions
230V(+/-10%),60HZ(+/-5%)Combined(+/-10%),1phase
11 Main motor rating hp (kW)
7.5(5.60)Normal rating with SF 1.1 Continuous duty
12 Type of motors (main drive & cooling fan
drive)
-
1 Ph Squirrel cage induction motor & 1 Ph fan motor
13 Insulation and protection of main motor
-
Class F / IP55
14 Rated speed of main motor rpm
3515
15 Frame size / Mounting type
-
213T / B35
16 Efficiency of main motor/Efficiency class
-
86%/NEMA-PREMIUM
17 Type of starter for main motor
-
Direct Online Starter
18 Fan motor rating per fan x No. of fans hp (kW)
0.127(0.095) x 1fan
19 Rated speed of fan motor rpm
3200
20 Max allowable package current with fan at
nominal power supply
Amps
38.9
21 Flow rate of cooling air @ static pressure (Pa) cfm
657 @ 0Pa
22 Oil recommended -
ELGI AIRLUBE UT Synthetic
23 Capacity of seperator tank (full volume) gal
0.634
24 Tank oil fill capacity gal
0.422
25 Oil carry over ppm
3
26 Reference conditions - ambient & altitude °F/ ft
113 and 3280
27 Discharge oil temperature °F
Minimum: Above PDP at given pr. & 90% RH
Maximum: Ambient + 104.4
28 Maximum allowable air temperature at outlet °F
Less than Ambient+27
29 Noise level of the compressor dB (A)
64+3
30 Air outlet port size inch
3/8" NPT
31 Overall dimensions of the unit, L x B x H inch
24.21 x 28.15 x 33.26
32 Overall dimensions with packing, L x B x H inch
27.95 x 30.7 x 45.27
33 Package nett. weight (Dry condition) lbs
402
34 Package gross weight with packing lbs
430
35 Reference standard for FAD and SPC -
ISO 1217- Annexure 'C '
36 Reference standard for noise level -
ISO 2151, Second Edition
37 Reference standard for air purity -
ISO 8573-1
Note:-
Prepared By ARAVINTH N Approved By JAYARAJ B
All data and information in this sheet are confidential and property of ELGI EQUIPMENTS LIMITED
This is system generated document and hence signature is not required
Page 1 of 1