Product Manual

2.2
General functional description
This operation and maintenance manual has been
specially designed keeping the customer in mind so that
the person can get the most out of this EG compressor.
Before starting the compressor, it is requested that the
manual should be read thoroughly. It contains vital
information about installation, commissioning, operation
and useful tips on maintenance to keep the compressor
as good as new, year after year. The manual has been
prepared with utmost care to help you understand the
various systems of the compressor, along with
descriptions, information and illustrations.
Following chapters are provided to help operate the
compressor in its best way.
 Safety - safety precautions that must be followed while
using the compressor.
 Technical specifications - technical details about the
compressor.
 Installation and commissioning - all site
requirements, procedures to be followed during
installation, commissioning, preservation etc.
 Functional description – parts, their function and
working.
 Operating instructions – to operate the compressor
properly.
 Maintenance – how to do the maintenance for the
compressor and their intervals.
 Troubleshooting – identification and solving the
problems.
 Decommissioning – how to decommission the
compressor, its disposal etc.
 ELGi services – services from ELGi: CCS, air audit,
spare parts
 Appendix – conversion tables, torque values, service
log book
Refer to the parts manual to identify the part number of
the required spare. Mention the Fab number, model and
part number while ordering.
This manual must be made available to the
compressor operating and maintenance personnel at
all times.
2.1.1 Definitions and symbols
This information is related to your safety and also to prevent
any problems relevant to the equipments used. To help
recognize this information better, the symbols are illustrated
in section “safety”.
All the information, illustrations and specifications in this
manual are based on the latest product information at the
time of preparation of the manual. Product improvement is a
continuous process in ELGi. The details in this manual are
likely to change without notice and ELGi reserves the right to
incorporate such changes.
Using the manual 2.1
NOTE
Note clarifies procedures or conditions which may otherwise
be misinterpreted or overlooked. Note may also be used to
clarify apparently contradictory or confusing situations.
Warning calls attention to dangerous or hazardous condi-
tions inherent to the operation, cleaning and maintenance
of the compressor which may result in fatal accident and
personal injury of the operator or other staff
Caution is to draw attention to a procedure which, if not
done correctly can lead to compressor damage.