Spec Sheet
Doc.No.NPD-EPSAC-SS-AC-(EN3)-2015-02-1460
SPECIFICATION SHEET
Product
Doc. Category :
Electric Powered Lubricated Screw Air Compressor
Marketing
Type :EN3 208-230V/60HZ
Revision : R13
Date(Org):20/03/2015
Date(Rev):08/05/2018
S.No Description Units Data
A Model -
EN3-125 EN3-150
B TPL Number -
S013456 S013457
1 Free air delivery - FAD
cfm
m3/min
13.5
0.38
13.1
0.37
2 Working pressure psi.g
125.0 150.0
3 Unloading pressure psi.g
128.0 153.0
4 Cut in pressure psi.g
103.0 128.0
5 Airend shaft power
hp
kW
4.16
3.10
4.70
3.51
6 Package input power @ full load hp (kW)
5.13(3.83) 5.80(4.33)
7 Package input power @ zero flow hp (kW)
2.05(1.53) 2.32(1.73)
8 Specific power consumption @ full load kW/100cfm
28.37 33.03
9 Capacity control system -
LOAD / UNLOAD
10 Nominal power supply conditions
230V(+/-10%),60HZ(+/-5%)Combined(+/-10%),1phase
11 Main motor rating hp (kW)
5(3.73)Normal rating with SF 1.0 Continuous duty
12 Type of motors (main drive & cooling fan
drive)
-
1 Ph Squirrel cage induction motor & 1 Ph fan motor
13 Insulation and protection of main motor
-
Class F / IP 55
14 Rated speed of main motor rpm
3500
15 Frame size / Mounting type
-
184T / B35
16 Efficiency of main motor/Efficiency class
-
83%/NEMA-PREMIUM
17 Type of starter for main motor
-
Direct Online Starter
18 Fan motor rating per fan x No. of fans hp (kW)
0.127(0.095) x 1fan
19 Rated speed of fan motor rpm
3200
20 Max allowable package current with fan at
nominal power supply
Amps
23
21 Flow rate of cooling air @ static pressure (Pa) cfm
625 @ 0 Pa
22 Oil recommended -
ELGI AIRLUBE UT Synthetic
23 Capacity of seperator tank (full volume) gal
0.634
24 Tank oil fill capacity gal
0.422
25 Oil carry over ppm
3
26 Reference conditions - ambient & altitude °F/ ft
113 and 3280
27 Discharge oil temperature °F
Minimum: Above PDP at given pr. & 90% RH
Maximum: Ambient +104.4
28 Maximum allowable air temperature at outlet °F
Less than Ambient+27
29 Noise level of the compressor dB (A)
61+3
30 Air outlet port size inch
3/8" NPT
31 Overall dimensions of the unit, L x B x H inch
24.21 x 28.15 x 33.26
32 Overall dimensions with packing, L x B x H inch
27.95x 30.7 x 45.27
33 Package nett. weight (Dry condition) lbs
352
34 Package gross weight with packing lbs
381
35 Reference standard for FAD and SPC -
ISO 1217- Annexure 'C '
36 Reference standard for noise level -
ISO 2151, Second Edition
37 Reference standard for air purity -
ISO 8573-1
Note:-
Prepared By ARAVINTH N Approved By JAYARAJ B
All data and information in this sheet are confidential and property of ELGI EQUIPMENTS LIMITED
This is system generated document and hence signature is not required
Page 1 of 1