User Manual

ELGENS CO., LTD 1 TDM Series User Manual
Warning!
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions manual, it may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which
are designed to provide reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference in which
case the user at his own expense will be required to take whatever measures may be required to correct
the interference.
Electric Shock Hazard – Do not operate the machine with its back cover removed. There are dangerous
high voltages inside.
Disclaimer
This information in this document is subject to change without notice. In no event shall ELGENS Co., Ltd.
be liable for damages of any kind, whether incidental or consequential, arising from either the use or
misuse of information in this document or in any related materials.
Packing List
Accessories (as ticked) included in this package are:
□ Panel Mounting Kits
□ 3 Pin Male Terminal Block
□ Optional Adapter
□ Other.___________________(please specify)
Safety Precautions
Follow the messages below to avoid your systems from damage:
◆ Avoid your system from static electricity on all occasions.
◆ Prevent electric shock. Don‘t touch any components of this card when the card is power-on.
Always disconnect power when the system is not in use.
◆ Disconnect power when you change any hardware devices. For instance, when you connect a
jumper or install any cards, a surge of power may damage the electronic components or the
whole system.