User Manual

ELGENS CO., LTD 12 TDM Series User Manual
4.3 OSD Operation
How to reconfigure
1. Press the “MENU/Enter” button to activate the OSD menu.
2. Press the “+” / ”–“ button to navigate through the functions. Select the highlight and desired function and press the “MENU/Enter”
button to activate it. If the function selected has a sub-menu, also press the “+” / ”–“ button to navigate through the sub-menu
functions and select the highlight and desired sub-menu function and press the “MENU/Enter” button to activate it.
3. Press the “+” / ”–“ button to change the settings of the selected function.
4. To save the OSD menu, press the “MENU/Enter” button and press the Auto/Exit until OSD menu disappears.
5. Repeat steps 1-3 to adjust other settings.
OSD function introduction