Wide Temperature TDM Series P-CAP Touch LCD Monitor User Manual Published in Taiwan Release Date : Dec 2021 Revision : V0.
Warning! This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
ELGENS WEEE, ROHS and REACH Compliance Statement When it comes to product design, the engineering team at ELGENS strives for energy efficiency and environmental friendliness--not only because it lowers monthly power costs for our customers, but also to ensure minimal energy consumption for a greener tomorrow. Though our products (no including customer consigned materials) are not officially certified, they are in fact compliant with WEEE, RoHS and REACH standards.
Table of Contents Warning!............................................................................................................................................................. 1 Disclaimer .......................................................................................................................................................... 1 Packing List .................................................................................................................................................
Chapter 1 1.1 General Descriptions Datasheet Title 10.
Ordering Code Model Number TDM-P101WT TDM-P104ST TDM-P121ST TDM-P150ST TDM-P156WT TDM-P170ST TDM-P173WT TDM-P185WT TDM-P190ST TDM-P215WT TDM-P240WT ELGENS CO., LTD Description 10.1" touch monitor with IP65 front bezel, DP / VGA / HDMI, Panel mounting kits, 3-pin terminal block DC 12V adapter 10.4" touch monitor with IP65 front bezel, DP / VGA / HDMI, Panel mounting kits, 3-pin terminal block DC 12V adapter 12.
1.2 General instructions 1. Support Vertical refresh rate up to 75Hz for VGA~SXGA+(1400x1050) and 60Hz for higher resolution of VESA Standard Timing. 2. Support VGA analog standard input (15-pin D-Sub connectors). 3. Automatic detection of separate synchronize and composite synchronizes of VGA. 4. Support Display Port input (DP) 5. Support High-Definition Multimedia Interface (HDMI) input . 6. RoHS compliant . 7. Support Timing Table Mode Resolution H Freq.(KHz) V Freq.(Hz) 1 640*350@70 31.469 70.
10 1024*768@60 48.363 60.004 11 1024*768@70 56.476 70.069 12 1024*768@72 58.038 71.918 13 1024*768@75 60.023 75.029 14 1280*70@50 36.91 49.82 15 1280*720@60 44.62 59.81 16 1280*1024@60 63.980 60.000 17 1280*1024@70 74.882 69.853 18 1280*1024@75 79.976 75.025 19 1360*768@60 47.72 59.799 20 1440*900@60 55.935 59.887 21 1680*1050@60 65.3 60 22 1920*1080@50 56.25 50.00 23 1920*1080@60 66.6 60 ELGENS CO.
Chapter 2 I/O Connect I/O Connect TDM-P121WT ELGENS CO.
Chapter 3 ELGENS CO.
Chapter 4 OSD Setting 4.1 OSD Button Power on LED : Off /Orange , On/Green On/Off : Power On/Off Monitor Menu/Enter : Open OSD , Enter , Save Increase : Select item , Increase value Decrease : Select item , Decrease value ELGENS CO.
4.2 OSD MAP Ma in C o lo r Im a g e S e tting O S D Me nu S e c o nd D e fa u l C ontra s t 0%~100% 50% Brightne s s 0%~100% 100% R e d 0%~100% 50% G re e n 0%~100% 50% Blue 0%~100% 50% C olor Adjus t C olor Te m p 9300/6500/5800/US ER Auto C olor C olor Adjus t C loc k 0%~100% 50% P ha s e 0%~100% 29% S ha rpne s s 0/1/2/3/4 H.P os ition 0%~100% 50% V.P os ition 0%~100% 50% O S D H.P os . 0%~100% 50% O S D V.P os .
4.3 OSD Operation How to reconfigure 1. Press the “MENU/Enter” button to activate the OSD menu. 2. Press the “+” / ”–“ button to navigate through the functions. Select the highlight and desired function and press the “MENU/Enter” button to activate it. If the function selected has a sub-menu, also press the “+” / ”–“ button to navigate through the sub-menu functions and select the highlight and desired sub-menu function and press the “MENU/Enter” button to activate it. 3.
A. Color Set a desired color setting from this menu. • Contrast : the adjusting range is from 0 to 100. • Brightness : the adjusting range is from 0 to 100. • Color Adjust : Red: the adjusting range is from 0 to 100. ELGENS CO.
Green: the adjusting range is from 0 to 100. Blue: the adjusting range is from 0 to 100. • Color Temp : contains 4 modes including 9300K, 6500K, 5800K and user ELGENS CO.
• Auto Color : Automatically adjusts the image to its optimized position, clock, and phase. (Only run on D-Sub input Mode) B. Image Setting (Only run on D-Sub input Mode) Set the image related setting from this menu. • Clock : the adjusting range is from 0 to 100 • Phase : the adjusting range is from 0 to 100 ELGENS CO.
• Sharpness : the adjusting range is from 0 to 4. • H.Position : the adjusting range is from 0 to 100 • V.Position : the adjusting range is from 0 to 100 C. OSD Menu Adjusts the OSD location and language ELGENS CO.
•OSD H.Pos.: Adjusts the horizontal position (H-Position) of the OSD from 0 to 100. •OSD V.Pos.: Adjusts the vertical position(V-Position) of the OSD from 0 to 100. •OSD Timer: Adjusts the OSD timeout from 5 to 60 seconds. ELGENS CO.
•Language: There are 7 languages for your selection, including English, French, Deutsch, Espanol Traditional Chinese, Simplified Chinese, Japanese. D. Signal Source: In this function, you can select your desired input source E. Signal Source: In this function, you can reset all setting to default value ELGENS CO.
Appendix.1 Panel Mounting Installation ELGENS CO.
