Specifications

PURELAB Option-R 7/15 Operator Manual ELGA
Page 20 PURELAB Option-R 7/15 Version 4 08/07
6. OPERATION
The PURELAB Option-R will run automatically and will signal alarm
conditions to ensure prompt efficient system management and
corrective action.
Note: To ensure that water purity remains at a
high level it is important to leave the
unit in process mode.
Dispensing
The unit should now be processing the specified standard of purified
water and there should be no alarms activated.
If the unit is not processing, press PROCESS to start it. Wait until the
water purity reaches the preferred purity level before use. Dispense
water from the dispense tap by pulling the tap handle forward.
6.1 Intermittent Mode
During periods of non-use the unit will automatically operate in
intermittent mode to maintain water quality. This mode will function
after the reservoir has been filled and the level maintained for 1 hour.
The unit will re-circulate the reservoir contents for 10 minutes every
hour.
Pressing the PROCESS button at any time during this mode will
initiate re-circulation.
Flash
Normal Process Screens
Tap position
A
lternative
ta
p
p
osition
Dispense Tap Position