Specifications

ELGA PURELAB Option-R 7/15 Operator Manual

PURELAB Option-R 7/15 Version 4 08/07 Page 13

Outlet to

reservoir

Recirculation

from reservoir

Blank

Drain

Recirculation and Drain Connections

5.3 Connecting up the PURELAB Option-R

Once the PURELAB Option-R unit has been positioned either on a

wall or on a bench, it should be connected as follows:

• Mains water inlet tube

• Drain

• Re-circulation from reservoir

• Outlet to reservoir

Step 1 - Fitting Tubes

1. PUSH in collet on connector.

2. PULL out transit plug.

3. CUT a clean square end on a 8mm (5/16") OD

semi rigid drain tube.

4. PUSH tube into connector.

CAUTION! Do not restrict drain line.

CAUTION! If the water supply is at a pressure greater

than 6 bar (90 psi) fit a pressure regulator

(LA512).

Connecto

Collet

Blanking

transit plug

Pull plug

Depress

collet

Clean square

cut end

Tube 8mm OD

Simply push in tube to attach

Tube in secured position

Fitting Tubes

Feedwater Inlet Connections