Specifications

ELGA PURELAB Option-R 7/15 Operator Manual

PURELAB Option-R 7/15 Version 4 08/07 Page 7

Electrical Requirements

Mains Input 100-240V ac, 50-60Hz all models

System Voltage 24V dc

Power Consumption with boost pump 80VA

Power Consumption without boost pump 50VA

Fuses 2 x T6.3 Amp

Reservoir level connection Jack Plug 3.5mm

Noise Level <45dBA

User Interface

Display Continuous graphical and numerical reservoir level display

Graphical flow schematic on screen with mimic display

Intuitive icons (Multilingual)

Adjustable settings Auto restart after power failure Selectable

Audible alarm Selectable

Water purity units MicroSiemen/cm or MegaOhms.cm

Water purity Alarm setpoints

Indicators Reverse osmosis permeate water Conductivity

De-ionized water Temp compensated resistivity/ conductivity

Temperature Degrees centigrade

Reservoir % Full

Pre-treatment cartridge Maximum remaining life indicator

UV lamp Maximum remaining life indicator

Ion-exchange cartridge Maximum remaining life Indicator

Alarms-Audiovisual Purified water purity Outside set point alarm

Reservoir Low level

Reservoir Level control disconnect alarm

UV failure alarm Non start or current outside limits

Pre-treatment cartridge Change reminder

UV lamp

Ion-exchange cartridge

Change reminder

Outputs RS232 Printer connection

RS232 Remote display connection

Volt free contact-internal

Safety Features

Power fail safe

Boost pump protection from particulates

Re-circulation pump protection from particulates

Low operating voltage 24V

Audio visual alarms

Adjustable alarm settings