User guide

71
Description Action Display
Set Code (enables editing)
(Page 3.0)
From READY page
Main 2x
+ to code 13,
Enter
Main 2x
READY
TECH SETUP
Tech Setup CODE 13
Axis Zero Offsets Page
(Page 4.9)
From Ready Page:
Main 3x
Arrow 9x
I [co -3.5] Eo -.28
Paz -.30 Po 0.00
Co is the compass offset and updates
automatically after each acquisition. The user
should not change this value.
Enter I [co -3.5] Eo -.28
Paz -.30 Po 0.00
Paz is the boresite offset for the RF beam.
This value is set in test and should not be
changed by the user.
Enter I co -3.5 Eo -.28
[Paz -.30] Po 0.00
Po is an offset for the polarization axis. An
offset can be permanently input by the user if
necessary. Code 13 allows for up to 8 degrees
of offset. If offset requires more than 8
degrees of adjustment, contact Tech Support
+ or – then Enter I co -3.5 Eo -.28
Paz -.30 [Po 0.00]
4.I Axis Offsets (con’t)