User guide

60
Description Action
Display
BLUE indicates default setting
Set Code (enables editing)
(Page 3.0)
From READY page
Main 2x
+ to code 13,
Enter
Main 2x
READY
TECH SETUP
Tech Setup CODE 13
LNB GAIN Page
(Page 3.8)
From Ready Page:
Main 2x
Arrow 8x
LNB [GAIN 100]
Offset 0 XXX
The user may wish to adjust the LNB gain as
measured by the built in tuner:
Gain = 100, nominal setting
Gain = 50, ½ of nominal gain
Gain = 200, double the nominal gain
When adjusting the gain, monitor the signal
strength number in the lower right.
Increasing the gain will increase the signal
level.
+ or – then Enter LNB [GAIN 100]
Offset 0 XXX
The user may wish to adjust the LNB offset as
measured by the built in tuner.
Adjust the offset when the antenna is pointed
at a cold sky. Adjusting the offset should
minimize the signal strength number when the
antenna is looking at cold sky.
+ or – then Enter LNB GAIN 100
[Offset 0 ] XXX
3.8 LNB GAIN