User guide

56
Description Action
Display
BLUE indicates default setting
Set Code (enables editing)
(Page 3.0)
From READY
page
Main 2x
+ to code 13,
Enter
Main 2x
READY
TECH SETUP
Tech Setup CODE 13
READY
Azimuth Stow / External Switch Page
(Page 3.6)
From Ready Page:
Main 2x
Arrow 6x
AZ [Stow 0.25]
Ext EN
The azimuth stow setting determines the
offset for the angular distance from the
azimuth axis reference switch to the desired
azimuth stow position. + or – will change the
angle. This is set in the factory.
+ or – then Enter AZ [Stow 0.25]
Ext EN
Ext EN indicates whether the pedestal
start/stow switch is enabled or disabled. Press
+ or – to change the selection, then Enter.
+ or – then Enter AZ Stow 0.25
Ext [EN/dis]
3.6 Azimuth Stow Setting
Az STOW is set at the factory and should not be adjusted except
under guidance of factory personnel. Damage to the antenna
may result from improper setting and may void warranty.
IMPORTANT