User guide

50
Description Action
Display
BLUE indicates default setting
Set Code (enables editing)
(Page 3.0)
From READY page
Main 2x
+ to code 13,
Enter
Main 2x
READY
TECH SETUP
Tech Setup CODE 13
READY
Level / Motor Control Page
(Page 3.3)
From Ready Page:
Main 2x
Arrow 3x
LEVEL [ON/OFF] Az PLNOR
GYRO OFF EL NOR
The user can turn the base level sensor off, this
would only be done during a maintenance or
troubleshooting activity. MAY CAUSE ANTENNA
ACQUISITION FAILURE.
+ or – then Enter LEVEL [ON/OFF] Az PLNOR
GYRO OFF EL NOR
The user can turn the azimuth and polarization
motor off, normally only a troubleshooting
function.
+ or – then Enter LEVEL ON Az PL [NOR/DIS]
GYRO OFF EL NOR
The user can turn the elevation motor off,
normally only a troubleshooting function.
+ or – then Enter LEVEL ON Az PL NOR
GYRO OFF EL [NOR /DIS]
3.3 Level/Motor Control (con’t)
IMPORTANT
Changes in pedestal design allow respective antennas to achieve higher
elevation angles. Attempting to exceed standard elevation limits on
antennas that are not modified will damage the antenna. Contact
TracStar Technical Support for more information.