User guide

40
2.3 Reference Satellite (con’t)
Description Action Display
The backup frequency is now flashing. Use +
or – to set the desired frequency or set to
10799 as default, then Enter. The default will
be automatically updated when the frequency
scan is run (para. 3.2 Set Test)
+ or – then Enter Rs2 f10799,[10799]
XXX.X USDvB
The user can select a scan method that uses
signal strength (SS) or frequency (Freq) or
USDvB to acquire the Reference Satellite.
+ or – then Enter Rs2 f10799, 10799
XXX.X [USDvB]
If more Reference Satellites are desired,
change to RsX then input the orbital positions
and frequencies. Repeat until all the applicable
Reference Satellites are input.
+ or – then Enter [RsX] f10799, 10799
XXX.X USDvB