User guide

39
2.3 Reference Satellite (con’t)
Description Action Display
Reference Satellite Page
(Page 2.3)
From Ready Page:
Main 1x
Arrow 3x
[Rs1] f10799,10799
XXX.X USDvB
The user can enter/edit the reference satellites
from this page. When [RSX] is flashing the
user can step to the next reference satellite
with + or -. There can be up to 12 Reference
Satellites stored. Select the desired Ref
satellite number then Enter.
+ or – then Enter [RsX] f10799,10799
XXX.X USDvB
The orbital position is now flashing and can be
edited. Press + or – to the desired value,
then Enter
+ or – then Enter RsX f10799,10799
[XXX.X] USDvB
The primary frequency is now flashing. Use +
or – to set the desired frequency or set to
10799 as default, then Enter.
The default frequency will be automatically
updated when the frequency scan is run
(para. 3.2 Set Test). Over 6-8 weeks without
power to the antenna, scanned frequencies
may be lost unless a save to EEPROM is
performed.
+ or – then Enter Rs2 [f10799],10799
XXX.X USDvB
Continued on Next Page