User guide

37
Description Action Display
Satellite Parameters Page
(Page 2.2)
From Ready Page:
Main 1x
Arrow 2x
SatAf10799, 10799
[0] 119 sr28
The user can toggle between SatA and SatB.
To change to SatB, press + to switch to SatB.
To change from SatB to SatA, press -. The
orbital position of the selected satellite is
displayed on the bottom row.
+ or – then Enter SatAf10799, 10799
[0] 119 sr28
To input a new frequency for SatA press Enter
then + or – to the desired frequency, then
Enter. The default frequency is 10799. When
the default is entered, the antenna will scan
for the best frequency available.
+ or – then Enter SatA[f10799], 10799
0 119 sr28
This is the secondary frequency and may be
used by the antenna to verify lock or as a
backup frequency, depending on the Lock
Word (paragraph 2.4)
+ or – then Enter SatAf10799, [10799]
0 119 sr28
sr is the symbol rate and should not be
adjusted.
2.2 Satellite Parameters (con’t)