User guide

35
Description Action Display
Jog Page
(Page 2.1)
From Ready Page:
Main 1x
Arrow 1x
Jog FAST A XXX.XX
Jog Position is now flashing. The user can select FAST or
SLOW jog increments. Fast=1.0 degree/step
Slow = 0.1 degree per step
+ or – then Enter Jog FAST A XXX.XX
The azimuth position is now flashing. The user can jog
the antenna by pressing + for clockwise and – for
counterclockwise.
+ or – then Enter
Jog FAST 1.0  ENT
[A 0] E 0 P 0
Now the elevation position is flashing. The user can jog
the antenna by pressing + for up and – for down.
+ or – then Enter
Jog FAST 1.0  ENT
A 0 [E 0] P 0
Now the polarization position is flashing. When viewed
from the rear of the dish. the user can jog the antenna
by pressing + for clockwise and – for counterclockwise.
+ or – then Enter
Jog FAST 1.0  ENT
A 0 E 0 [P 0]
2.1 Jog (con’t)
NOTES:
1. The antenna has a 99 step counter limit. If the antenna jogs to
its limit stop and you need to go further, pres STOP then START
to reset the counter to ‘0’. Then continue jogging the antenna.
2. The user must press START/STOP to activate the antenna
motors. The top green LED will flash when the motors are
enabled.
3. DO NOT JOG THE ANTENNA IN AZIMUTH OR POLARIZATION
WHILE IN STOW.
4. DO NOT DRIVE THE ANTENNA BEYOND ITS TRAVEL LIMITS IN
ANY AXIS.
IMPORTANT