User guide

32
Description Action Display
Set Code (enables editing)
(Page 3.0)
From READY page
Main 2x
+ to code 13
Enter
Main 2x
READY
TECH SETUP
Tech Setup CODE 13
COMPASS Page
(Page 1.5)
From Ready Page:
Arrow 5x
COMPASS [NORMAL]
After the code is entered, the word NORMAL is
flashing. Press + or – to change to Manual
input, then ENTER.
+ or – then Enter COMPASS [NORMAL]
The Display now prompts the user to jog the
antenna to face or point south (north in
southern hemisphere). The Jog function is
described in section 2.1.
+ or – then Enter COMPASS [MANUAL]
JOG South, Start
Once the antenna is pointed south using the
Jog function, press START and the system will
initiate its scan from the manually input south
position.
*Ideally, the antenna should be pointed as
close to south as manual positioning allows.
The Display now prompts the user to ENTER A
KNOWN HEADING. 180 DEGREES = SOUTH
+ or – then Enter COMPASS [HEADING]
JOG Heading, Start
1.5 Manual Compass Input (con’t)