User guide

28
Description Action Display
Polarity Page
(Page 1.3)
FOR TracStar1200 and 1800 ANTENNAS ONLY
From Ready Page:
Arrow 3x
POLARITY [VertDN]
After the code is entered, the word VertDN is
flashing. The user can now manually input the
desired polarity, VertDN or HorzDN.
+ or – then Enter POLARITY [VertDN]
ReUSE Freq is now flashing. The user can
now manually select the ReUSE or ReSCAN
options.
NOTE: ReSCAN is not intended to replace the
Satellite Parameters / Section 2.2 of the
manual. If the proper frequencies are in place
for SatA and SatB, a simple ReSCAN can be
used after changing polarity. If problems are
encountered, refer to Section 2.2, reset the
SatA and SatB frequencies to 10799 and the
antenna will scan for the best available
frequency.
+ or – then Enter [ReUSE Freq]
[ReSCAN Freq]
1.3 POLARITY (con’t)
IMPORTANT