User guide

24
1.1 Set Reference Satellite (con’t)
Description Action Display
Set Code (enables editing)
(Page 3.0)
From READY page
Main 2x
+ to code 13
Enter
Main 2x
READY
TECH SETUP
Tech Setup CODE 13
Set Reference Page
(Page 1.1)
From Ready Page:
Arrow 1x
SetREF
X[XXX.X] Y XXX.X
Reference X is the primary reference
satellite. Select the appropriate
reference satellite from the library.
Factory default is AUTO for USAdvb
only.
+ or – then Enter
(Press + to select
known satellite or
“auto”, then Enter)
SetREF
[XXX.X] Y [XXX.X]
Reference Y is the secondary satellite in
case the primary satellite is not
available, i.e., blockage. In some cases
the RefY satellite will be used as a check
during the acquisition. If RefX is set as
AUTO, then setting RefY to other than
AUTO will cause the RefY location to be
tried FIRST, followed by the AUTO list as
needed.
+ or – then Enter
(Press + to select
known satellite or
“auto”, then Enter)
SetREF
XXX.X Y [XXX.X]