User guide

14
1. Quick Setup Reference – Known Reference Satellites - CONUS
Step Function Action Display Page
1. Power up antenna Turn on power at ACU READY
2. Set Code (enables editing)
(Page 3.0)
From READY page
Main 2x
+ to code 13, Enter
Main 2x
READY
TECH SETUP,[Code 0]
Tech Setup [CODE 13]
READY
3.
(Input Reference Satellites Page 1.1)
Select Ref 61.5 Satellite
Select Ref 119.0 Satellite
Factory Default is AUTO
From Ready page:
Arrow 1x
+ or – through Ref Sat List
ENTER
+ or – through Ref Sat List
Enter
Main
READY
SetREF, 61.5
XXX.X
SetREF, 119.0
XXX.X
READY
4. (Input data satellite parameters
Page 1.2)
Toggle between SatA and SatB
Input orbital position for SatA
Input orbital position for SatB
From READY page:
Arrow 2x
+ or –
+ or –
Enter
READY
SELECT DATA
[SatA] or [SatB]
XXX.X
NOTE: The factory default
setting for Reference
Satellite is AUTO. The
system will select a
reference satellite that is
optimum for your GPS
position.
Locate the antenna so that
it has an unobstructed
view of the orbital arc.
Orient the antenna so that
it comes up generally to
the south, if located north
of equator (north, if
located south of equator).
IMPORTANT