Operating instructions

8
Owner's Manual
In the easy to clean, membrane control panel, on the lower front of the TV, there
are 11 large, easy to read, buttons. Either the patient or the TV representative
can use the 5 buttons on the right side, to turn the TV on and off, change
channels and raise or lower the sound. These functions can be controlled as well,
with the infrared hand unit. The far right side of this panel responds to the infrared
beam produced when you press the buttons on the hand held infrared unit.
On the left side of the membrane control panel, the Menu button and the Enter
button makes it easy for patients to rent the television or "self rent", as it is called,
when the TV representative is not present. The other 4 buttons, on the left side of
the panel, become active when the L-10D ELF TV is operated as part of a
computerized system. Patients can then use these buttons to select from the
menu options that appear on the TV.
The infrared hand unit lets the TV representative manage the special features of
the L-10D ELF, such as levels of service, channel groupings and selections and
as well change the quality of the picture, features and choice of language.
The L-10D ELF is capable of receiving both Analog and Digital channels. The L-
10-D EFL infrared hand unit has numbered buttons which allow direct selection of
TV channels. Digital channel numbers can consist of a maximum of 4 Major digits
and 3 Minor digits. The Major and Minor digits are separated by a dash. Analog
channels have only three Major digits and the Minor digits are assumed to be 000.
It is only necessary to enter the significant digits of a channel number followed by
the ENT button on the IR Hand Unit. Pressing 3 followed by ENT will select
channel 3 Analog. Pressing 3,dash,1,ENT will select channel 3-1 Digital. Unless
in the SETUP MENU only channels in the Channel Map set for the current Level
of Service may be selected.In addition to normal TV channels the L-10D ELF has
Composite Audio/Video and PC (VGA) inputs. These inputs may be added to to
one or more Channel Maps so that they can be accessed just like a normal TV
channel. Video channel has been assigned the arbitrary channel number of 0-1
and only supports analog signals. PC Channel has been assigned the arbitrary
channel number of 0-2.
Note: Unless specially modified, the Video and PC inputs are only accessible
inside the TV.
7
Owner's Manual
About the L-10D ELF television
About the L-10D ELF television
EARPHONE Jack
The EARPHONE Jack is in the lower left corner. Insert an ear piece or head set
and the sound comes only from this device.
Closed Captioning :
When available, captions (CC) may be displayed on a selected channel by
pressing the ENTER/CC button on the front panel of thetelevision or on the
remote control unit.
The first press of this button will display the current closed captioning mode. By
continuing to press the ENTER/CC button all possible selections can be made.
While on a Digital channel the possible modes are are Service 1, Service 2,
Service 3, Service 4, Service 5, Service 6, OFF.
While on an Analog channel the possible modes are Caption 1, Caption 2,
Text 1, Text 2, OFF.
Analog and Digital settings are independent and changing one does not alter the
other, except that selecting OFF for one or the other will turn them both OFF.
Once a selection is made it is remembered until you change it.
To turn off captions continue pressing the ENTER/CC button until the OFF mode
is displayed.
Note: Closed captioning may be disabled by the TV Representative in the TV
SETUP MENU.