Data Sheet

Ether I/O 24R Users Manual V1.1
Elexol Pty Ltd Version 1.1 Page 4 http://www.elexol.com
ELEXOL
ELECTRONIC SOL UT IONS
Contents
When your Ether I/O 24 module arrives you should receive the following items.
1 The Ether I/O 24 Module in a Protective Anti Static Bag
2 2 Jumper Links (please note that these links may be factory fitted to the CONFIG
connector on the board)
Please inspect the Module carefully for any damage that may have occurred during shipping or
handling. If you do not receive the module in its protective bag, if the Jumper links are missing,
or your module appears damaged in any way, please contact your place of purchase immediately.
Please be sure to download the latest support tools and datasheets from the ELEXOL
website at www.elexol.com
and check that you are using the most up to date versions.
Technical Support and Further Information
For any questions relating to the Ether I/O 24 or if we can assist you with integrating the Ether
I/O 24 into your own equipment please contact us by Email at [e-mail]
Email: [e-mail]
Ph: [phone] Fax: [phone]
Elexol Pty Ltd Elexol Pty Ltd
Unit 1 PO Box 2742
8 Pirelli Street, Southport Southport Business Centre
Queensland 4215 Queensland 4215
Australia Australia
Product Use Limitations, Warranty and Quality Statement
This product is not designed, intended, or recommended for use in systems intended to support or
sustain life, or for any other application in which the failure of the product could create a situation
where personal injury or death may occur and should not be used for those applications.
The Ether I/O 24 is warranted to be free from manufacture defects for a period of 12 months from
the date of purchase. Subjecting the device to conditions beyond the Absolute Maximum Ratings
listed in this document will invalidate this warranty. As the Ether I/O 24 is a static sensitive device,
anti static procedures should be used in its handling.
All Ether I/O 24 units are tested during manufacture and are despatched free of defects.
Elexol is committed to providing products of the highest quality. Should you experience any product
quality issues with this product please contact our quality assurance manager at the above address.
Disclaimer
This product and its documentation are provided as-is and no warranty is made or implied as to
their suitability for any particular purpose. Elexol Pty Ltd will not accept any claim for damages
arising from the use of this product or its documentation. This document provides information on
our product and all efforts are made to ensure the accuracy of the information contained within.
The specifications of the product are subject to change and continual improvement without
notification.
Other than the extent permitted by law and subject to the Trade Practice Act, all and any liability
for consequential loss or damage arising from an ELEXOL Ether I/O24 module is hereby limited,
at ELEXOL’s discretion, to replacement or repair.