Use and Care Manual

Wiytamo [e-mail]
[e-mail] Wiytamo
29
Press the button repeatedly to select the fan speed as desired.
C. Drying your room
Press the button on the control panel or remote control, the LED
of DRY operation lights up. The fan speed is unable to select.
The user should connect a hose to the drainage port at the bottom of
the unit to facilitate continuous drainage of the unit.
Note: In this mode, the fan speed switches over to low speed and the
temperature cannot be selected.
D. Heating your room
Press button repeatedly until the LED of HEAT operation lights up.
Press button to set the temperature higher than the room
temperature.
Note: The user should connect a hose to the drainage port at the bottom
of the unit to facilitate continuous drainage of the unit.
E. Sleep mode
The sleep mode can be activated when in cool mode and heat mode.
 In cool mode :
After 1 hour the preset temperature is increased by 1 ℃, after another
hour the preset temperature will again be increased by 1 ℃.

In heat mode :
After 1 hour the preset temperature is decreased by 1 ℃, after another
hour the preset temperature will again be decreased by 1
℃
.
Then the temperature is kept constant for 10 hours. And all the indicators
dim to dark. The fan speed may switch over to low speed for silent
operating and cannot be selected.