Instructions / Assembly

Press to set the heating
start and end time.
Press to turn on or off the 7
days timer for heater.
The number shows on
the display.
7 days timer and heater
indicators are both on.
Repeatedly press to cycle
through timer options.
Select an amount of time
for the appliance to operate,
and then automatically turn
off.
Choose between 0.5, 1, 2, 3,
4, 5, 6, 7, 8, 9 hours.
Repeatedly press to cycle
through 3 flame effects.
The flame runs.
The current flame setting
L1; L2; L3 shows on the
display.
The number 30, 1H, 2H,
3H, 4H, 5H, 6H, 7H, 8H,
9H, 0H shows on the
display.
Press to turn on/off the
heater.
The heater can be run
independently.
The temperature shows
on the display and the
heater indicators will turn
off after 10 seconds if the
flame is on.
Press to select the
temperature you want the
room to reach from the
range of 16-28℃(60-82℉)
and then 58℃(99℉), which
will keep the heater on. Hold
the button to switch the unit
between ℃/℉.
The display of the
appliance shows the
temperature.
16-28 in Celsius degree
corresponds to 60-83 in
Fahrenheit degree. There
will be changes in number
while switching between
℃/℉.