User Guide

3. Wait about 4-5 minutes, when the “preheating” indicator light is off and “DI” sound (very lower sound can be
heard carefully) indicate completing warm up process, the machine will be ready to work.
4.Keep pressing the red “Fog” button to spray fog. and It will spray fog continuously for 20-30s, then stop spraying
for preheating fog.
And you also can press the “on” button on the remote to spray fog. And press “off” button on the remote to stop.
5. When the “preheating” light is on, the machine is heating. About 1-2 minutes later, the “preheating” light is off, it
indicates completing warm up process. You can use the fog machine again.
6. About the LED light, you can use the remote to control it. Press the “on” button on the remote, the light is on.
Then you can choose the color or effect which you like. There are three auto mode light effects and 12 kinds
different colors. If you do not need the light, you can press the “off” button to turn off the light.
7.When you find that the oil-free light is on, please add some more fog liquid into the bottle. If you do not add the
liquid, the machine will make the strong noise, that will damage the machine, so please make sure enough
liquid inside the bottle.
8. Press the rocker switch again to power off fog machine and unplug power cable from power socket and store it
in a cool, dry place.
The function of the remote
1. You can use the controller to change the LED color of the fog machine at any time when the power of the
machine is turned on.
2. When you press any button of the remote controller, the fog machine can not be controlled, it is possible that
the battery is exhausted. Open the rear cover and replace the new battery.
Maintenance
1. Please use mixed liquid of 80% distilled water and 20% vinegar to clean the dirty in refractory pipe before and
after each use.
2. Use dry cloth to clean machine after cooling and keep it dry for storage.
3. Add fog fluid again when you use it next time.
Press “on” to spray the fog, and press “off” to stop fog spraying.
Press “on” to turn on the lights, and press “off” to turn off the lights.
AUTO mode, the lights change as jump self-propelled.
AUTO mode, the lights change as fade self-propelled
White lights flash
Press the buttons of different colors, and the lights will
change into corresponding colors