myCobot-User-Mannul-EN-V20201231
Table Of Contents
- About the manual
- Reading objects of the manual
- How to use
- 1.Security
- 2. About myCobot
- 2.1 Background
- 2.2 Introduction
- 2.3 Features
- Related Patents about myCobot
- 3.1 Controller and Actuator
- 3.1.1 M5Stack Basic Main Controller
- 3.1.1.3 Parameter
- 3.1.2.1 Features
- 3.1.2.2
- 3.2 Mechanical Structure
- 3.2.1 Size and working range
- A）Robotic Arm
- The actual weight of myCobot collaborative robot i
- 3.3 Electronics and Electrical
- 4.Software
- For software updates, please check out our Github
- 5. Visual Programming and Industrial Software
- 6. After-sales Service
- During the warranty period of the delivered produc
- 7. Q&A
- Q: The compiler could not find the corresponding d
- A: The devide can be developed only after setting
- Q: The compiler could not compile the sample progr
- A: The required project library is not installed o
- Q: The Device failed to function properly after bu
- A: The firmware for ATOM terminal needs to use our
- Q: There is a slight wobble in the vertical positi
- A: Please check if myCobot is in a vertical state.
- Q: Will the ROS system charge later ?
- A: ROS is open source and will be updated to our G
- 8. Contact Us
Shenzhen Elephant Robotics Technology Co., Ltd.
3
Overview
About the manual
Welcome to use MyCobot collaborative robot and thank you for your purchase.
This manual describes the precautions for proper installation and use of MyCobot .
Please read this manual and other related manuals carefully before installing this robot
system. After reading, please keep it in a safe place so that you can access it at any time.
Reading objects of the manual
This manual is targeted to:
installer.
Debugger.
Maintenance staff.
Those who install/debug/maintain the MyCobot collaborative robot must be
trained in Elephant Robotics and have the mechanical and electronic
knowledge required for the above work.
How to use
This manual should be used when doing the following works:
Installation work: Move the robot to the working position and fix it to the base according
to the installation instructions.
Debugging: Debugging the robot to work status.
Maintenance work: regular maintenance robot system to ensure its normal functioning.
When the robot malfunctions due to environmental influences or improper operation of
the user, or a certain component of the robot system exceeds the normal service life,
the robot needs to be repaired.
Note: This manual is applicable to international users, as well as users in Hong Kong,
Macao and Taiwan.
This manual is not updated regularly. The updated date is the version number. User
s can download the latest version from the official website of Elephant Robot at any time.