myCobot-User-Mannul-EN-V20201231
Table Of Contents
- About the manual
- Reading objects of the manual
- How to use
- 1.Security
- 2. About myCobot
- 2.1 Background
- 2.2 Introduction
- 2.3 Features
- Related Patents about myCobot
- 3.1 Controller and Actuator
- 3.1.1 M5Stack Basic Main Controller
- 3.1.1.3 Parameter
- 3.1.2.1 Features
- 3.1.2.2
- 3.2 Mechanical Structure
- 3.2.1 Size and working range
- A）Robotic Arm
- The actual weight of myCobot collaborative robot i
- 3.3 Electronics and Electrical
- 4.Software
- For software updates, please check out our Github
- 5. Visual Programming and Industrial Software
- 6. After-sales Service
- During the warranty period of the delivered produc
- 7. Q&A
- Q: The compiler could not find the corresponding d
- A: The devide can be developed only after setting
- Q: The compiler could not compile the sample progr
- A: The required project library is not installed o
- Q: The Device failed to function properly after bu
- A: The firmware for ATOM terminal needs to use our
- Q: There is a slight wobble in the vertical positi
- A: Please check if myCobot is in a vertical state.
- Q: Will the ROS system charge later ?
- A: ROS is open source and will be updated to our G
- 8. Contact Us
Shenzhen Elephant Robotics Technology Co., Ltd.
25
A: The required project library is not installed or there is a conflict with the project library. Please
check that the project library is installed correctly first. If it is installed correctly but still cannot compile,
please reinstall arduino development environment .
Q: The Device failed to function properly after burning the firmware to ATOM ?
A: The firmware for ATOM terminal needs to use our factory firmware. If any other firmware is
accidentally burned, you can choose”myCobot固件烧录器-选择ATOM终端-选择串口-选择ATOMMAIN固
件”to burn the ATOM terminal.
Q: There is a slight wobble in the vertical position but not in the motion state ?
A: Please check if myCobot is in a vertical state. myCobot is not affected by gravity in a vertical state,
mechanical voidage can cause minor wobbles. But there will not be wobbles when it's out of the vertical
state. The recommended speed is 400-500 in a vertical state.
Q: Will the ROS system charge later ?
A: ROS is open source and will be updated to our Github.There is no charge for firmware upgrades.
8. Contact Us
If you have any need for help, please contact us shown as following.
Shenzhen Elephant Robotics Technology Co., Ltd
Address: B7, Yungu Innovative Industrial Park 2, Nanshan, Shenzhen, China
Email: support@elephantrobotics.com
Phone: +86(0755)-8696-8565 (working day 9:30-18:30)
Website: www.elephantrobotics.com