Instructions/Assembly Guide

DETAILED INSTRUCTIONS TO SET UP A CORNER
Open your Elephant corner extension.
1 2 3
Extend the honeycomb horizontally.
4 5 6
7 8 9
Connect the latch and secure it.
10 11 12
Place the wooden beam in the blue connectors.
Insert the black screw to keep it in place.
Connect the armrest to the corner extension by
placing it from upside down, using the direction
of the 2 fork connectors.
Take all components of the corner out. Open the belt.
Do the same for the other side.
Place the wooden beam in the
bottom black connectors.
Do the same for the other side.
Put the seating pad on the corner. Place the seat cushion as shown.
10
9
6
5
4
2
3
8
1
7
ARMREST
CORNER
INSIDE THE BOX YOU WILL FIND:
Separate armrest Corner extension body Small clamps (3 pieces)
Back pillows (2 pieces) Seating pad Large clamp
Back pillow covers (2 pieces) Wooden beams (4 pieces)
Seat cushion Black screws (8 pieces)