Instructions/Assembly Guide

Put the back lining on and make sure to stick it
onto the seating pad and then stick it onto the
bottom back beam by the velcro.
10 12
Stick the front panel to the seating pad. Make
sure that the arrow is placing up and then stick
it onto the bottom beam by the velcro.
11
Do the same for the bottom blue wooden beam.
7
Put the seating pad on the seat with the velcro
facing up.
8
Insert the black screw in the seating pad and rotate
it with the wing nut.
9
Open your Elephant seat.
1
Take all the components of the seat extension out. Extend the honeycomb horizontally.
32
1
2
3
4
5
6
7
8
9
10
Flip the seat extension down and place the
wooden black beam in the black connectors.
4
Insert the black screw.
5
Next, insert the blue wooden beam into the
back blue connectors.
6
DETAILED INSTRUCTIONS TO SET UP A SEAT EXTENSION
INSIDE THE BOX YOU WILL FIND:
Seat Extension Body Back pillow cover Small clamp Wooden beams (4 pieces)
Back lining Seat cushion Front panel Black screws (8 pieces)
Back pillow Seating pad