Instructions/Assembly Guide

DETAILED INSTRUCTIONS TO SET UP A DYNAMIC SOFA
1
2
Open the box. Push the cushion, then twist and remove the
wooden support.
Expand the beams.
Slide the connectors to the middle to lock the beams.
8
5 6
Now, insert the stopper screw in the hole as shown.
Make sure that the stopper screw is in the same
direction of the hinge.
7
Expand the sofa honeycomb by pulling outwards on
the armrests in a straight line.
Do the same for the black beams and make sure
that the nut is in the same direction of the hinge.
3
Take the cushions out by using the belt.
4
9
Place the blue wood beam inside the blue connectors
on the front part of the honeycomb and make sure to
place the middle support with the middle connector
as shown.
11
Rotate the thumb screw with the wing nut together.
10
Do the same for the other blue wood beam. See
image No. 9
12
Put the base lining on the sofa with the velcro
facing up.
INSIDE THE BOX YOU WILL FIND:
Sofa Body - Elephant Core Thumb screws & Wing nuts (8 Pieces) Back cushions (2 pieces) Braces
Blue wooden beams (2 pieces) Back Lining (2 Pieces) Stopper Screws & Nuts (4 pieces) Set of 4 straps (for future moving)
Black wooden beams (2 pieces) Front Panel Back Covers (2 pieces) Wing Screws (4 pieces)
Base Lining Seat Cushions (2 pieces) Armrests (2 pieces, attached)