Instructions/Assembly Guide

DETAILED INSTRUCTIONS TO SET UP AN OTTOMAN
Now, enjoy!Take the cushion out of the plastic bag
and place it on top of the ottoman base.
Take all components of the ottoman out. Open the ottoman honeycomb by pulling
the sides away from each other in a straight line.
In the box there are 4 wooden
beams and 8 screws.
Insert the two blue beams into
the blue connectors at the top.
Insert the black screw to keep it in place. Screw the
metal butterfly in the back of the black screw.
Repeat for all beams.
Insert the two black beams into the
black connectors in the bottom of the ottoman.
Make sure that the velcro is facing down. Insert a screw to keep it in place.
Unfold the base lining and place it on the ottoman. Then put the cover sheet over it. Start by putting the cover and slowly pull it down
from the 4 sides, all at the same time.
Attach the cover to the base using the velcro
at the bottom of the ottoman.
1 2
1
2
3
4
6
5
3
4 5 6
7 8 9
10 11 12
13 14 15
Open your Elephant in a Box.
INSIDE THE BOX YOU WILL FIND:
Base padding Unit of folded Honeycomb
Wooden beams (4 pieces) Black screws (8 pieces)
Cover Seat cushion