Instructions/Assembly Guide

Now, enjoy!Take the cushion out of the plastic bag
and place it on top of the ottoman base.
OTTOMAN SET-UP INSTRUCTIONS
INSIDE THE BOX YOU WILL FIND:
1 Base padding 1 Unit of folded Honeycomb
4 Wooden beams 8 Screws
1 Cover 1 Seat cushion
Take all components of the ottoman out. Open the ottoman honeycomb by pulling
the sides away from each other in a straight line.
In the box there are 4 wooden
beams and 8 screws.
Insert the two blue beams into
the blue connectors at the top.
Insert a screw to keep it in place.
Repeat for all beams.
Insert the two black beams into the
black connectors in the bottom of the ottoman.
Make sure that the velcro is facing down. Insert a screw to keep it in place.
Unfold the base lining and place it on the ottoman. Then put the cover sheet over it. Start by putting the cover and slowly pull it down
from the 4 sides, all at the same time.
Attach the cover to the base using the velcro
at the bottom of the ottoman.
[e-mail] | ELEPHANTINABOX.COM | @ELEPHANT.INABOX
1 2
1
2
3
4
5
3
4 5 6
7 8 9
10 11 12
13 14 15
Open your Elephant in a Box.