Instructions/Assembly Guide

SEAT EXTENSION SET-UP INSTRUCTIONS
INSIDE THE BOX YOU WILL FIND:
Seat Extension Body Seating pad
Back Lining Small clamp (2 pieces_
Back pillow Front panel
Back pillow cover Wooden beams (4 pieces)
Seat cushion Rivets (8 pieces)
[e-mail] | ELEPHANTINABOX.COM | @ELEPHANT.INABOX
Open your Elephant seat.
1
Take all the components of the seat out.
2
Extend the honeycomb horizontally.
3
Place the wooden beam in the blue connectors.
4
Insert the rivet to keep it in place.
5
Do the same for the upper wooden beam.
6
Place the wooden beam in the bottom connectors.
7
Make sure that the velcro is facing down.
8
Do the same with the back beam.
9
Put the seating pad on the seat with the velcro facing
up.
10
Put the back lining on and make sure to stick it onto
the seating pad and then stick it onto the bottom
back beam by the velcro.
11
Stick the front panel to the seating pad. Make sure
that the arrow is placing up and then stick it onto the
bottom beam by the velcro.
12
13 14
1
2
3
4
5
6
7
8
9
10