Instructions/Assembly Guide

CORNER EXTENSION SET-UP INSTRUCTIONS
INSIDE THE BOX YOU WILL FIND:
Separate armrest Seating pad
Back pillows (2 pieces) Wooden beams (4 pieces)
Back pillow covers (2 pieces) White screws (8 pieces)
Seat cushion Small clamps (3 pieces)
Corner extension body Large clamp
[e-mail] | ELEPHANTINABOX.COM | @ELEPHANT.INABOX
Open your Elephant corner extension.
1 2 3
Extend the honeycomb horizontally.
4 5 6
7 8 9
Connect the latch and secure it.
10 11 12
Place the wooden beam in the blue connectors.
Insert the screw to keep it in place.
Connect the armrest to the corner extension by
placing it from upside down, using the direction
of the 2 fork connectors.
Take all components of the corner out. Open the belt.
Do the same for the other side.
Place the wooden beam in the
bottom black connectors.
Do the same for the other side.
Put the seating pad on the corner. Place the seat cushion as shown.
10
9
6
5
4
2
3
8
1
7
ARMREST
CORNER