User Guide
Table Of Contents
- 1 Informative letter
- 2 EC Marking
- 3 Safety
- 4 Product presentation
- 5 Quick instructions for commissioning
- 6 Intervention inventory
94
13
Quick instructions for commissioning
5.3.3.3 Dual driver setting
In the “Dual Drive” screen the default settings require that the first modulator (TX1) is
routed to the antenna through the amplifiers, while the second (TX2) is diverted to a
possible dummy load.
Rotate the encoder to position the cursor under the word CHANGE.
Press to activate the exchange.