User Guide

92
8
LOCAL
E
SCROLLING SELECTION
Quick instructions for commissioning
5.3 Main parameter setup
To set the parameters from the display the equipment must be in
LOCAL mode.
It is also possible to partially view the menus in REMOTE mode, provided that the pa-
rameter “SHOW DIP. ON REMOTE : TRUE” is present (for details, refer to the paragraph
“User interface” on the “Com. ID LC/RT disp. mode” screen).
To switch from LOCAL to REMOTE mode rotate the supplied key on the selector.
In LOCAL mode, the blue led turns on.
All navigation steps are carried out from the encoder located on the front panel. With
the handle it is possible to perform the following actions:
• HIGHLIGHTED ITEM SELECTION: press the handle briefly.
• ITEM SCROLLING: rotate the handle clockwise/anticlockwise.
• INCREASING/DECREASING: rotate the handle clockwise/anticlockwise.
• GO BACK TO THE MAIN MENU: keep the handle pressed for at least 1 sec.).