User Guide

18 Safety
The equipment is directly connected to the “building installation”
Between the equipment and the “building connection” there is an interposed structure
• To ensure its correct operation do not cover the ventilation grids on the equipment.
Do not place the equipment close to heat sources, flammable products or closed
installations without appropriate ventilation.
• All firefighting and safety rules for the room where the equipment is located must
be carefully followed.
• Avoid any contact between the equipment and liquids. Always disconnect the
equipment before carrying out any cleaning operations. Do not use liquid or spray
detergents.
• Some components contain TOXIC SUBSTANCES, such as for example BERYLLUM OXIDE.
Please be aware that in some countries rules for storing and disposing of hazardous
materials may apply.
• Following a visual check, if any component seems damaged, fractured or not intact,
apply maximum care to its removal by hand or other means.
• Please ensure that any person in charge of the maintenance or use of a transmit-
ter with parts under hazardous voltage is able to perform artificial respiration and
cardiac massage. All staff must be trained on first aid practices. It is recommended
to hang in a visible position a panel with clear instructions of first aid procedures for
people injured in a work accident and to supply rooms where electrical equipment
is present with first aid kits. It is recommended to organize and make available to
all staff an intervention plan for connections with local public institutions or private
first aid facilities.
RF Exposure Safety Distance Warning
According to ISED regulations: to the maximum of the output power of the
apparatus, to guarantee the limits of exposure declared within this document, it
is necessary that the antenna gain used with this device should be 0dBi or less
and all persons should maintain a minimum separation distance of 42.9955 m
(4299.55 cm) (141.061 Feet) for general uncontrolled exposure and general
controlled exposure.
For FCC standards, a safety distance of 34.6641 m (3466.41 cm) (113.727 Feet)
is declared.
Limites d’exposition RF: en réglant au maximum de la puissance de sortie de
l’appareil, afin de garantir les limites d’exposition déclarées dans ce document, il
est nécessaire que le gain d’antenne utilisé avec cet appareil doit être de 0 dBi
ou moins et toutes les personnes doivent conserver une distance de séparation
minimale de 42.9955 m (4299.55 cm) (141.061 Feet) pour les expositions
générales non contrôlées et les expositions générales contrôlées.