0x • 60x • 120x • 220x * C2D Digital Microscope * C2D Camera Stand * USB Cable (5ft. or 1.5m ) * Software (CD-ROM) * Six Prepared Slides with Case * Dissecting Tools * Instruction Manual WARNING! Only for use by children over 10 years old. Only for use under the supervision of an adult. This toy contains functional sharp needle, sharp edge on scalpel, scissors, spatula, tweezers, and prepared slide. CAUTION! Read the instructions before use, follow them and keep them for reference.
Congratulations for purchasing the C D Digital Microscope, one of the newest learning tools! 2 ABOUT THE C D DIGITAL MICROSCOPE 22 This C2D digital Microscope will encourage creative play activities that are directed by your children by harnessing the power of your PC. With the C2D Digital Microscope, you will be able to explore your surroundings in a way as never before and share these findings with friends and family.
BASIC COMPONENTS CAMERA CD an d of on s an rvisi or pe sciss e su el, r th scalp de e un ge on us for p ed ly shar . On old edle, ars ne ye arp 10 l sh ep er ov tiona d ke ren func an ild ch ains them w e by nt us y co follo e, for is to de. us ly On ult. Th sli fore ad ared s be prep ction tru e. ins renc the fe ad for re Re em th nt seme e ba scop ra cro g) Came le Mi lon gurab (1.
DETAILED COMPONENTS USB Cable C2D CAMERA CAMERA Shutter Button Focus Adjustment Handheld Unit Revolving Turret Ring Focus Knob C2D Digital Microscope Arm Color Filter / Aperture Your Package contains: Light Compartment 2 1. C2D Digital Microscope 2. C2D Camera Stand 3. USB Cable (5 ft. or 1.5m) 4. Software (CD-ROM) 5. Prepared Slides (6) with Case 6. Stainless Steel Spatula 7. Stainless Steel Scissors 8. Stainless Steel Tweezers 9. Stainless Steel Needle 10. Stainless Steel Scalpel 11.
SYSTEM REQUIREMENTS • A computer that is USB capable • Windows 98TM (2nd Edition), Me Windows® 2000 Professional and Windows XP • Intel® PentiumTM 200 MHz or faster • 64 MB RAM • Minimum 75 MB free hard disk space • Sound and Video that are compatible with Microsoft® DirectX® 8.
SOFTWARE INSTALLATION The installation of the software consists two steps: STEP ONE - Device driver installation STEP TWO - C2D software installation 1. Insert the CD-ROM into the CD-ROM drive, the setup program will be activated automatically. NOTE: Clicking the Next > button will skip to STEP TWO - Install 2 the C D Software. Next Cancel STEP ONE - Install Device Driver NOW CONNECT THE C2D DIGITAL MICROSCOPE ™ TO THE COMPUTER 2.
3. Click the Next > button Back Next Cancel Next 4. Click the Next > Cancel button again and you will see the following screen.
5. Select "CD-ROM Drive" and click Next > Back button to install the driver accordingly. Next > Cancel Next Cancel For Windows 2000 or XP: A pop - up window will appear when the C2D device driver is being installed, please click 6. Once the new hardware device has been installed properly, please proceed to step two to install the C2D software. Once the hardware has been installed properly, click the button to finish the device driver installation.
USING THE C2D SOFTWARE, continued 2 STEP TWO - Install the C D Software dfasdasd Next Cancel 1. Click the Next > button to finish the application software installation. Finish 2. Once the software has finished installation, click the button. You can now run the C2D software. NOTE: ® ® The setup program will take a while to install Microsoft DirectX 8.0 components. It does not mean that your computer has crashed. You might have to restart your computer.
2 USING THE C 2D DIGITAL MICROSCOPE Setup Suggestion 2 Please remember that the C D Digital Microscope can be used in the handheld mode, so make sure that the work area is free from obstruction and the monitor is viewable. Controls Learning the C2D controls Once you have the C2D software installed and running, you can use the controls to focus, change magnification and capture picturess/movies. Focus Knob Shutter Button Revolving Turret Ring Focus Adjustment Color Filter / Aperture Focusing – 1.
USING HANDHELD MICROSCOPE MODE Focusing – The handheld unit itself can be used to focus by moving the unit closer or further from the object NOTE : image This image on the screen will have a delay. Turn the focus knob slowly and wait for the to refresh before adjusting again. Changing Magnification – Change the magnification of the image by turning the Revolving Turret Ring. Taking Images – Images on the screen can be captured by pressing the Shutter Button.
2 USING THE C D SOFTWARE C2D Main Studio Light Light Press Contrast Delete button to turn the light on/off. Contrast Move the tap left and right to adjust the contrast. Take Image Press button to capture the current image to "My records". Make Video Press button to start making video to "My records". NOTE: Press this button again to finish recording. My records Images A list of images have been saved in your hard disk. You can select the record and view them from the lmage Viewer.
USING THE C2D SOFTWARE, continued Image Viewer Copy to clipboard Print Click button to print out the image from the printer. NOTE: It would not have any effect unless you have installed the appropriate printer driver. Copy to clipboard Click button to copy the image to the clipboard. TIPS: You can utilize this feature to process the image further from the other software such as Adobe® PhotoShop®. You can also use Microsoft®Office to make your own presentation.
USING THE C2D SOFTWARE, continued Video Viewer Stopped Seek Bar Position the mouse pointer on the Seek Bar playing the whole video sequentially. . You can locate frames directly without Play Click button to start playing the video. Stop Click button to stop immediately. Pause Click button to suspend playing the video.
CARE & MAINTENANCE Bulb Replacement Use a Philips screw driver to open the light compartment. Bulb Specification: 2.
TROUBLESHOOTING MESSAGE SOLUTION 2 The C D Digital Microscope is not connected to the computer. Connect the C2D Digital Microscope to the computer. If the problem still exists, you have to remove the C2D Digital Microscope device driver and install it again. (Please consult Windows® User Guide). Video recording feature is not available. Reinstall the C2D software. Out of memory. Please exit other software to free up more memory. Cannot turn on the light.
